Artesian Spas · South Seas Spas

Artesian Spas 729L hot tub

Six seats. Suits a family, or friends who soak together.

  • Seats: 6 seats
  • Size: 7′ × 7′
  • Power: 240V, 40 A
Price on requestWhat it costs

Free. Your price range, then one dealer near you.

Sit in it. 6 seats.

7′ (84″)7′ (84″)5′9″ adult
To scale, from Artesian Spas’ published size, beside a 5′9″ adult.
Lounger
Artesian Spas doesn't say
Size
7′ × 7′, 36″ tall
Water
325 gallons
Weight
726 lb empty

What it costs.

Price

Price on request

This maker doesn't post its prices, so we don't print one. Ask, and we'll send you the price range.

Price detail

To keep it hot

About $24 a month

Standby in California’s test, at the US average 18.19¢ per kWh. Heating fresh water and using the jets add to it.

Running costs by state

Wiring

A 240V circuit

An electrician’s hookup: $600 to $2,200 or more, by Jacuzzi’s planning guide.

Every set-up cost

What owners say.

From owner reviews and forums across Artesian Spas tubs, not just this model.

Owners like

  • Jet power and hydrotherapy effectiveness
  • Long service life when the owner has a functioning dealer
  • Full-foam insulation and cold-climate energy efficiency

Owners complain about

  • Topside panel, main control board and display failures
  • Pump failures, especially circulation pumps, within the first one to three years
  • Parts backorder and discontinued parts
All themes, and complaint records

Owners like

Owners complain about

  • Topside panel, main control board and display failures. The most frequently reported single failure. Symptoms: the display goes blank, white lines run across the LCD, buttons crack or stop responding, and jets and lights cut out intermittently. Repeat replacement of the same part is common; one Elite owner reports three panel replacements.artesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.comyelp.com
  • Pump failures, especially circulation pumps, within the first one to three years. Circulation and jet pump failures at 6 weeks, 6 months, 12 months and repeatedly after that. One Grand Bahama owner had two pumps fail within a year of a January 2020 purchase. One Piper Glen owner went through two circulation pumps, two heaters and two ozonators in 18 months.artesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.com
  • Parts backorder and discontinued parts. Owners report waiting 2 to 12 months for warranty parts: 2 months and then more than 4 months for two successive Grand Bahama pumps (2020 to 2021), 7 months for a Maui XL circulation pump (2023), 9 months for a third digital panel (2021), and over a year for an Elite circulation pump in Canada (2020 to 2021).artesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.compoolspaforum.com
  • Factory refuses direct contact: 'call your dealer'. The most consistent service complaint. Owners calling Las Vegas are told the factory deals with dealers, not consumers; several report being hung up on or told not to call back. Some report no callback at all on a spa under full warranty. A 2020 Yelp reviewer was told plainly that they do not deal with customers.artesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.com
  • Dealer-dependent outcomes. The clearest pattern across every kind of source: the same brand produces 5-star and 1-star outcomes largely depending on the dealer. Complaints often name the dealer, not Artesian, as the point of failure.poolspaforum.comartesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.com
  • Leaks at glue joints, fittings and valve bodies. Leaks reported from year 1 to past year 10, several traced to workmanship rather than wear. A Quail Ridge owner opened the cabinet and found a PVC joint that was never fully glued, with the jets and fittings intact. A 2023 owner paid about $500 out of pocket for what turned out to be a faulty fitting after the warranty ran out.artesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.com
  • Pillows and headrests degrading early and excluded from the warranty. Headrest foam bubbles, delaminates or disintegrates, sometimes within 6 months, shedding black particles into the water. Owners are told it is a maintenance item, or the damage is blamed on their water chemistry. Reported replacement costs are $69 per pillow (2013) and about $300 for a set (2021). The maker's own warranty documents confirm the exclusion.artesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.comyelp.com
  • Cabinet, cover and shell-surface degradation. Cabinet panels fading, shrinking out of their aluminum channels or warping away from the tub within 2 to 3 years, even on tubs kept under a gazebo or covered patio. Covers becoming waterlogged or rotting: one owner replaced a cover at 6 years, and another bought an $1,800 replacement after the original rotted.yelp.comartesian-spas.pissedconsumer.comartesian-spas.pissedconsumer.com

Artesian Spas as a company

  • 3.8 of 5 on Google from 181 reviews.

How it’s built. The 8 build checks, in plain words.

The same eight checks we run on every brand, answered from Artesian Spas’ own documents. Tap one for what it means and the evidence.

Self-supporting shellDoes the shell hold itself up?Partly
Shell layers: an acrylic skin backed by fiberglass, self-supporting compared with propped on posts

Fiberglass-backed shell, but a wood frame and foam share the load.

Artesian's warranty names the fiberglass backing behind the acrylic as the structure it covers for life. The shell sits on a pressure-treated wood frame and ABS base, and Artesian credits the frame and foam with the strength rather than claiming the shell stands alone. Island and Elite are full foam; most South Seas tubs use ArcticPac insulation instead.

Applies to: All models

Clamped plumbingAre the hoses glued and clamped?Partly
How a hose joint goes together: glue on the ridged barb, the hose pushed on, then a stainless clamp tightened; beside it, a clamped joint (good) and a glue-only joint years later, weeping

Glued barb joints, no clamps on the main runs since 2019.

In October 2019 Artesian moved to Shur-Grip hose, a reinforced flex line with a PVC helix inside that glues onto a smooth barb with no clamp over it. Clamps are still used on other hose types, such as the FROG @ease plumbing. Tubs built before that change used clear tubing with clamps.

Applies to: All models built from October 2019 on

Manifold-fed jetsDoes each jet get its own line?Not published
Manifold plumbing feeds each jet its own hose; daisy-chained jets share one line

Artesian Spas’ documents cover other series, not this one. Ask the dealer.

Applies to: DirectFlow models (Artesian Elite, Island Elite); the rest of the range isn't verified

Standard partsCan any repair tech buy the parts?Partly
A pump labelled with the supplier's own name and number is sold in many places; one with only a house number is sold in one place

Balboa, Gecko and Waterway inside, but fitting your own voids coverage.

Independent suppliers openly sell Artesian packs, pumps, jets and filters from the usual industry brands, so no tech is locked out. The owner's manual excludes any part not purchased from Artesian and says unapproved replacements terminate the whole spa warranty. Go through the dealer until the coverage runs out.

Applies to: All models

Compression-fitted jetsAre the jet bodies held by a nut, not glue?Partly
Three ways a jet body is held in the shell: threaded with a gasket and back nut that unscrews (good), pushed into a rubber grommet (OK), or glued in and cut out to replace (avoid)

Some jet bodies come with a nut and gasket; most aren't documented.

An independent parts seller lists Artesian's 3-inch Typhoon body with a mounting nut and gasket, and its whirlpool body with a nut. Other sizes don't say, and Artesian publishes nothing on it. Nothing shows glued bodies.

Applies to: All series

Adjustable jetsCan you turn each jet up or down?Not published
Three jet controls: turning a jet's face changes that one jet, a diverter knob moves water from one seat to another, an air control adds bubbles

Artesian Spas’ documents cover other series, not this one. Ask the dealer.

Applies to: Per-seat control on Artesian Elite and Island Spas Elite (DirectFlow); other lines get zone diverters and per-jet face adjustment

Service networkCan someone near you fix it?Partly
A dealer's technician close by drives a parts-stocked van to the house quickly; a home far from any dealer waits longer, and in winter a long wait can freeze the plumbing

Dealer-only service, and Artesian never publishes how many dealers exist.

Artesian sells and services through authorized dealers, and the warranty is void if anyone else does the repair. It does not transfer to a second owner. Parts are easy to buy independently, but owner reports on service are mixed, including a nine-month wait for a replacement control panel.

Applies to: All models

American made?Built in North Las Vegas, Nevada.Yes
Yes: built in a US plant the maker names. Partly: a US plant and one abroad, with no word on which built yours. No: built abroad, with molded parts shipped from there

Built in North Las Vegas, Nevada.

North Las Vegas, Nevada: 100,124 sq ft plant built by Alston Construction, opened 2005; it has also built Marquis since 2023.

Applies to: All models

Also on this model

Full-foam insulationIs it foamed all the way through?Other method
Full-foam insulation fills the cabinet; perimeter insulation lines the walls and leaves the middle open

A different method: ArcticPac insulation with ABS bottom.

Warranty

Shell structure
Lifetime
Shell surface
3 years
Equipment
3 years
Plumbing
3 years
Cabinet
1 year
Labor
3 years
Heater
3 years

What you get.

South Seas Spas. A numbered range from 3 to 8 seats. Standard models are basic; Deluxe models add a PillowFall and DynaStar LED.

Massage
1 jet pumpGentle massage: 2 HP continuous in all
Water care
Ozone (option) · UV-C light (option)
Cover
Included
Extras
Music (option) · 8 shell and 3 cabinet colors

What stands out

  • Strong 5.0 BHP primary pump. Most models use a 5.0 BHP 2-speed pump (2.0-2.5 HP continuous).
  • Premium water care available. Diamond AOP (UV-C plus ozone) and FROG @ease are options on this line.

Worth knowing

  • ArcticPac insulation standard. Standard insulation is ArcticPac with an ABS bottom.
2 more about the South Seas Spas
  • Ozone mostly optional. Ozone is standard only on the 737 and 840 models.
  • 3-year warranty. Lifetime structure, but 3-year surface, parts, labor and plumbing and a 1-year cabinet.

Similar tubs. Same size, any brand.

Jacuzzi J408L from an angle

Jacuzzi J408L

  • 6 seatsLounger
  • 7′5″ × 7′5″
Price on request
The detailsAll 98 specs, the energy filing and every source

Every specification

Everything Artesian Spas publishes for the 729L. The dot after a value opens the document it came from.

Size & capacity

Seats
6
Length
84"
Width
84"
Height (cabinet)
36"
Water (gallons)
325 gal
Water (liters)
1,230 L
Weight, empty
726 lb

Jets & pumps

Jet pumps
1
Pump horsepower
5.0 BHP 2-Spd

Electrical & heat

Voltage
240V
Amps
26 A maximum current (1-pump configuration, all models in the line)
Breaker
40 A GFCI (1-pump configuration, all models in the line)
GFCI required
Yes
120V plug-and-play
Single-pump models in this line can be configured for 120 V
Heater (240V)
5.5 kW

Build & insulation

Insulation
ArcticPac insulation with ABS bottom
Base pan
ABS Bottom
Shell material
Cast acrylic
Cabinet material
Grandwood (maintenance free)
Cabinet colors
Grey, Charcoal Black, Java
Cover included
Yes
Built in
United States

Water care

Filter area
50 sq ft
Ozone
Optional (standard only on 737 & 840 models)
UV
Diamond AOP™ (optional)

Controls & features

Interior lighting
Blue LED (standard on non-Deluxe models)
Exterior lighting
Not offered (kickrail lighting is only on the 737 and 840)
Water features
PillowFall (optional)

In Artesian Spas’ words

Shell colors
White Solid, Silver Marble, White Pearl, Smoky Mountains, Glacier Mountain, Tuscan Sun, Midnight Canyon, Storm Clouds
Audio
Optional Bluetooth® Music Experience (Bluetooth receiver, AM/FM, USB, aux-in, four speakers, subwoofer) or Aux Input Media Locker; two 3 in. patio speakers optional

Energy filing

Standby power
181 W, about $24.03 a month at 18.19¢ per kWh
California’s limit for its size
213 W
Typical for its size
182.5 W (the middle of 122 tubs this size)
Water in the test
312 gallons
Filed as
729L Deluxe, October 11, 2021

Standby is what the tub draws just holding its temperature, measured to California’s test method ↗. Your bill depends on your weather, your rate and how often you soak.

Where Artesian Spas’ documents disagree

Two of its own documents give different answers. Check these against your quote.

Water capacity
325 gal / 1230 L or 360 gal / 1,363 L
Pump HP
5 BHP 2-Spd or 4.8 BHP 2-Spd
Cover type
All Seasons Shield Cover standard or All Seasons Shield Cover optional; vinyl cover standard

Ask the dealer

Artesian Spas doesn’t publish the cover thickness, frame material or number of filters for the 729L. Ask for them in writing.

What’s a good deal on the 729L?

We send you the price range, by call, text or email: what a great deal, a good deal and market value look like. Then we introduce you to one Artesian Spas dealer near you, who reaches out knowing what you expect to pay.

Get a price on this tub

Free. Your price range, then one dealer near you.

Get a price on this tub Free price range, then one dealer