Jacuzzi · J4 Collection

Jacuzzi J408L hot tub

Six seats, one of them a lounger you lie back in. Suits a family, or friends who soak together.

  • Seats: 6 seats
  • Lounger: Lounger
  • Size: 7′ 5″ × 7′ 5″
  • Power: 240V, 40–60 A
Price on requestWhat it costs

Free. Your price range, then one dealer near you.

Sit in it. 6 seats, one lounger.

7′ 5″ (89″)7′ 5″ (89″)5′9″ adult
To scale, from Jacuzzi’s published size, beside a 5′9″ adult.
Seating
Lounge seating
Lounger
Yes, oneLie in it at the showroom: if your feet don’t reach the end, you’ll float.
Comfort
3 headrests
Size
7′ 5″ × 7′ 5″, 34″ tall
Water
325 gallons
Weight
3,625 lb full of waterAbout 1.8 tons (914 lb empty). 66 lb per square foot: more than the 40 an ordinary deck is built for, so a deck needs a builder's check.

What it costs.

Price

Price on request

This maker doesn't post its prices, so we don't print one. Ask, and we'll send you the price range.

Price detail

To keep it hot

About $21 a month

Standby in California’s test, at the US average 18.19¢ per kWh. Heating fresh water and using the jets add to it.

Running costs by state

Wiring

A 240V circuit

An electrician’s hookup: $600 to $2,200 or more, by Jacuzzi’s planning guide.

Every set-up cost

What owners say.

3.2out of 5 on Jacuzzi’s own siteJacuzzi runs and moderates that page, so read it with that in mind.

Jacuzzi’s complaint records

Jacuzzi as a company

  • 1 of 5 on ConsumerAffairs from 104 reviews.
  • The Better Business Bureau lists 19 complaints in three years and rates the company C-.

How it’s built. The 8 build checks, in plain words.

The same eight checks we run on every brand, answered from Jacuzzi’s own documents. Tap one for what it means and the evidence.

Self-supporting shellDoes the shell hold itself up?Not published
Shell layers: an acrylic skin backed by fiberglass, self-supporting compared with propped on posts

Jacuzzi doesn't publish this. Ask the dealer.

The shell is acrylic over a bonded vapor barrier and a resin composite backing, so it is reinforced. Around it sits a frame of sixteen uprights, an ABS base pan and sixteen under-pan supports, and several models use removable foam panels rather than poured foam. Jacuzzi doesn't say which part carries the weight of the water.

Applies to: All models; structural detail comes from the J-445 (J-400 series) frame drawing

Clamped plumbingAre the hoses glued and clamped?Partly
How a hose joint goes together: glue on the ridged barb, the hose pushed on, then a stainless clamp tightened; beside it, a clamped joint (good) and a glue-only joint years later, weeping

Mostly barbed flex hose with clamps, but some glued rigid PVC.

The parts catalog stocks barbed fittings, flexible pipe and hose clamps in every size, and at least one jet assembly ships with a clamp in it. It also stocks rigid Schedule 40 pipe and glue-on couplings. Some repairs will mean cutting and gluing instead of loosening a clamp.

Applies to: All models, 2016 to 2026 model years (the span of the parts catalog)

Manifold-fed jetsDoes each jet get its own line?Yes
Manifold plumbing feeds each jet its own hose; daisy-chained jets share one line

Jets feed from manifolds, each jet on its own port.

The catalog stocks water manifolds from 2 up to 16 ports and separate air manifolds up to 12, all barbed. A blocked or leaking jet does not starve the ones behind it. No series-fed jet plumbing appears anywhere in the parts list.

Applies to: All models, 2016 to 2026 model years (the span of the parts catalog)

Standard partsCan any repair tech buy the parts?Partly
A pump labelled with the supplier's own name and number is sold in many places; one with only a house number is sold in one place

Balboa and Waterway parts inside, but the control boards are locked.

Pumps and packs come from Balboa, Gecko, Waterway, Laing and Grundfos, and the full parts catalog with part numbers is public. Boards built since April 2018 are encrypted and need a dealer tool to reprogram. Fitting non-Jacuzzi parts voids the warranty.

Applies to: All models; the encryption lock applies to tubs built from about April 2018 on

Compression-fitted jetsAre the jet bodies held by a nut, not glue?Partly
Three ways a jet body is held in the shell: threaded with a gasket and back nut that unscrews (good), pushed into a rubber grommet (OK), or glued in and cut out to replace (avoid)

Nut-held jet bodies through 2024; newer tubs switch to push-in grommets.

Jacuzzi's own parts catalogue lists a nut and O-ring for every main jet back through 2024. From 2025 on, most jets move to a grommet-style back that presses into a rubber ring with no nut. Neither type is glued.

Applies to: All series

Adjustable jetsCan you turn each jet up or down?Partly
Three jet controls: turning a jet's face changes that one jet, a diverter knob moves water from one seat to another, an air control adds bubbles

Some jet faces rotate for flow; other controls work by zone.

The manual says flow to certain jets can be raised or lowered by turning the face, and to leave at least six open. Other jets are fixed direction. Air toggles and diverters shift whole groups, and the 2026 J5 has no control for an individual pump.

Applies to: All models; the pump behavior described applies only to the J5 Collection

Service networkCan someone near you fix it?Yes
A dealer's technician close by drives a parts-stocked van to the house quickly; a home far from any dealer waits longer, and in winter a long wait can freeze the plumbing

Dealer-serviced, with part numbers published openly.

Manuals send owners to their dealer for fault codes, water care and winterizing, and the warranty requires dealer or factory service. Independents can still buy parts, and service parts carry 180 days. Dealer count in your area is not published, so check coverage locally.

Applies to: All models, North America

American made?Built in Mexico and near Pordenone, Italy.Partly
Yes: built in a US plant the maker names. Partly: a US plant and one abroad, with no word on which built yours. No: built abroad, with molded parts shipped from there

Built in Mexico and near Pordenone, Italy.

Mexico: J-200 to J-500 hot tubs built July 2021 to December 2022 were made in Mexico, per a 2023 federal recall. Near Pordenone, Italy: Main European plant, per owner Investindustrial.

Applies to: All models; the Chino address is for the North American hot tub operation

Also on this model

Full-foam insulationIs it foamed all the way through?Not published
Full-foam insulation fills the cabinet; perimeter insulation lines the walls and leaves the middle open

Jacuzzi doesn't publish the insulation for this model. Ask the dealer.

Warranty

Shell structure
10 years
Shell surface
7 years
Equipment
5 years
Plumbing
5 years
Cabinet
5 years
Heater
5 years

What you get.

J4™ Collection. A new line for 2026 with modern styling, pitched on wellness: True Water, infrared and red-light therapy, and SmartTub as standard.

Massage
39 jets on 2 jet pumpsStrong massage: 5 HP continuous in all
Filter pump
Yes, a separate circulation pump
Extras
Phone app · 2 shell and 3 cabinet colors

What stands out

  • True Water standard. Nanobubble water treatment comes standard.
  • SmartTub standard. Jacuzzi says the SmartTub app is standard on all J4 models.

Worth knowing

  • Circulation is 8-hour. On the J4, the ProClarity filter runs on an 8-hour circulation pump, not a 24-hour one.

Similar tubs. Same size, any brand.

The detailsAll 101 specs, the energy filing and every source

Every specification

Everything Jacuzzi publishes for the J408L. The dot after a value opens the document it came from.

Size & capacity

Seats
6
Loungers
1
Seats
Lounge
Shape
Square
Length
89"
Width
89"
Height (cabinet)
34"
Dimensions as published
89.0 x 89.0 x 34.0 in
Water (gallons)
325 gal
Water (liters)
1,230 L
Weight, empty
914 lb
Weight, filled
3,625 lb

Jets & pumps

Total jets
39
Jet pumps
2
Circulation pump
Yes

Electrical & heat

Voltage
240V
Amps
40A: 25A; 50A: 36A; 60A: 47A (2-pump system)
Breaker
40, 50, 60 A
GFCI required
Yes
Heater (240V)
5.5 kW
Heater type
High Flow

Build & insulation

Shell colors
Platinum, Porcelain
Cabinet material
ProFinish™ synthetic cabinet
Cabinet colors
Modern Hardwood, Brushed Gray, Smoked Ebony

Water care

Filtration
5-stage filtration
Filter area
40, 60

Controls & features

Topside control
Control Panel
App / Wi-Fi
SmartTub® System (standard on J4™ models)
Interior lighting
Yes
Exterior lighting
Yes
Water features
1
Headrests
3

Doesn’t have: 120V plug-in.

In Jacuzzi’s words

Jet systems
PowerPro® FX, PowerPro® FX Large Rotational, PowerPro® NX2, PowerPro® MX, PowerPro® RX, PowerPro® FX Rotational
Jets by type
15 × PowerPro FX Jets, 4 × PowerPro FX Large Rotational Jets, 6 × PowerPro NX2 Jets, 4 × PowerPro MX Jets, 6 × PowerPro RX Jets, 4 × PowerPro FX Rotational

Energy filing

Standby power
160 W, about $21.25 a month at 18.19¢ per kWh
California’s limit for its size
217 W
Typical for its size
189 W (the middle of 117 tubs this size)
Water in the test
325 gallons
Filed as
J408L, December 15, 2025

Standby is what the tub draws just holding its temperature, measured to California’s test method ↗. Your bill depends on your weather, your rate and how often you soak.

Ask the dealer

Jacuzzi doesn’t publish the pump horsepower, cover thickness, frame material, insulation or number of filters for the J408L. Ask for them in writing.

What’s a good deal on the J408L?

We send you the price range, by call, text or email: what a great deal, a good deal and market value look like. Then we introduce you to one Jacuzzi dealer near you, who reaches out knowing what you expect to pay.

Get a price on this tub

Free. Your price range, then one dealer near you.

Get a price on this tub Free price range, then one dealer