Hot Spring · Highlife

Hot Spring Jetsetter hot tub

Three seats, one of them a lounger you lie back in. Suits a couple, with room for one more. It plugs into a standard 120V outlet.

  • Seats: 3 seats
  • Lounger: Lounger
  • Size: 7′ × 5′ 8″
  • Power: 120V plug-in or 240V
$17,499Maker's list price (MSRP)Checked Oct 2026 · hotspring.comWhat it costs

Free. Your price range, then one dealer near you.

Sit in it. 3 seats, one lounger.

7′ (84″)5′ 8″ (68″)5′9″ adult
To scale, from Hot Spring’s published size, beside a 5′9″ adult.
Seating
Object Object · Object Object · Object Object
Lounger
Yes, oneLie in it at the showroom: if your feet don’t reach the end, you’ll float.
Comfort
Neck and shoulder jets
Size
7′ × 5′ 8″, 33″ tall
Water
245 gallons
Weight
3,070 lb full of waterAbout 1.5 tons (500 lb empty). 77 lb per square foot: more than the 40 an ordinary deck is built for, so a deck needs a builder's check.

What it costs.

Price

$17,499Maker's list price (MSRP)Checked Oct 2026 · hotspring.com

Expect options, delivery, installation and tax on top of Hot Spring's MSRP; dealers set the actual price.

Price detail

To keep it hot

About $19 a month

Standby in California’s test, at the US average 18.19¢ per kWh. Heating fresh water and using the jets add to it.

Running costs by state

Wiring

120V, or 240V for faster heating

An electrician’s hookup: $600 to $2,200 or more, by Jacuzzi’s planning guide.

Every set-up cost

What owners say.

4.56out of 5 from 645 reviews on Hot Spring’s own siteHot Spring runs and moderates that page, so read it with that in mind.

Hot Spring’s complaint records

Hot Spring as a company

  • 2.8 of 5 on ConsumerAffairs from 163 reviews.
  • The Better Business Bureau lists 18 complaints in three years and rates the company C-.

How it’s built. The 8 build checks, in plain words.

The same eight checks we run on every brand, answered from Hot Spring’s own documents. Tap one for what it means and the evidence.

Self-supporting shellDoes the shell hold itself up?Partly
Shell layers: an acrylic skin backed by fiberglass, self-supporting compared with propped on posts

Fiberglass-reinforced shell, but Watkins says the frame carries the load.

Acrylic is thermoformed and backed with resin and fiberglass, then attached to a surrounding frame. Watkins' own patent credits that frame with absorbing the shell's loads, and the Highlife foam is said to add support. Limelight and Hot Spot use FiberCor fill, which carries no load at all.

Applies to: All models, split by collection: Highlife and Highlife NXT are full-foam; Limelight and Hot Spot are filled with FiberCor blown fiber

Clamped plumbingAre the hoses glued and clamped?Not published
How a hose joint goes together: glue on the ridged barb, the hose pushed on, then a stainless clamp tightened; beside it, a clamped joint (good) and a glue-only joint years later, weeping

Hot Spring doesn't publish this. Ask the dealer.

Watkins never describes how hose meets fitting, and owner's manuals from 1999 to 2025 say nothing about clamps. No parts diagram or verified teardown photo exists either. On full-foamed Highlife models, reaching any joint means cutting foam out first.

Applies to: All collections; not published for any of them

Manifold-fed jetsDoes each jet get its own line?Not published
Manifold plumbing feeds each jet its own hose; daisy-chained jets share one line

Hot Spring doesn't publish this. Ask the dealer.

The SmartJet diverter confirms the tub is split into jet groups fed through a valve. What happens below that valve is undocumented. There is no way to tell whether each jet gets its own run or jets are teed together.

Applies to: All collections; not published for any of them

Standard partsCan any repair tech buy the parts?Partly
A pump labelled with the supplier's own name and number is sold in many places; one with only a house number is sold in one place

Every part is Watkins-only, but anyone can buy them.

The control box, heater, pumps, filters and jets are all Watkins designs ordered by part number, with no Balboa or Waterway equivalent. At least five independent suppliers stock them without dealer credentials. But the warranty is void if anyone other than an authorized rep does the repair.

Applies to: All models; Highlife, Limelight and Hot Spot share the same proprietary equipment

Compression-fitted jetsAre the jet bodies held by a nut, not glue?Partly
Three ways a jet body is held in the shell: threaded with a gasket and back nut that unscrews (good), pushed into a rubber grommet (OK), or glued in and cut out to replace (avoid)

Most jet bodies clamp the shell with a threaded ring; the newest aren't documented.

A Hot Spring parts seller lists wall-fitting nuts that clamp the shell to the jet body, the gaskets, and a spanner wrench for them. Moto-Massage jets screw to the shell. The 2023-and-later 5-inch body isn't documented, and Hot Spring publishes nothing on it.

Applies to: All series

Adjustable jetsCan you turn each jet up or down?Yes
Three jet controls: turning a jet's face changes that one jet, a diverter knob moves water from one seat to another, an air control adds bubbles

Twist the faceplate and each body jet adjusts on its own.

Hydromassage, SoothingStream, HydroStream and JetStream jets each throttle by turning the faceplate. A Comfort Control lever meters air to the Precision and Moto-Massage jets as a group, and SmartJet diverts water between seats. Precision, Moto-Massage and the footwell jets have no individual water control.

Applies to: Highlife Collection (2025 manual); the same Comfort Control and SmartJet design appears across Hot Spring collections

Service networkCan someone near you fix it?Yes
A dealer's technician close by drives a parts-stocked van to the house quickly; a home far from any dealer waits longer, and in winter a long wait can freeze the plumbing

Sold and serviced through authorized dealers, with a factory backstop.

Hot Spring sells only through franchised showrooms, and the manual routes setup, operation and repair questions to your dealer. The warranty lists the Vista, California factory by address and phone if the dealer cannot help. Service quality still depends on which dealer is near you.

Applies to: All models, US market

American made?Built in Vista, California and Tijuana, Mexico.Partly
Yes: built in a US plant the maker names. Partly: a US plant and one abroad, with no word on which built yours. No: built abroad, with molded parts shipped from there

Built in Vista, California and Tijuana, Mexico.

Vista, California: Headquarters and manufacturing facility at 1280 Park Center Drive. Tijuana, Mexico: First plant opened 1996; Watkins does not say which models are built there.

Applies to: Hot Spring tubs sold in the US; tubs built for other markets weren't checked

Also on this model

Full-foam insulationIs it foamed all the way through?Other method
Full-foam insulation fills the cabinet; perimeter insulation lines the walls and leaves the middle open

A different method: Multiple layers of urethane foam.

Warranty

Shell structure
7 years
Shell surface
7 years
Equipment
5 years
Plumbing
5 years
Cabinet
5 years
Heater
5 years

What you get.

Highlife. Hot Spring's top line: Moto-Massage DX jets, salt water care included and 100% no-bypass filtration.

Massage
22 jets on 1 jet pumpGentle massage: 1.6 HP continuous in all
Water care
Ozone (option) · Salt systemFiltering: 100% No-Bypass Filtration with High-Flow Tri-X filters
Filter pump
Yes, a separate circulation pump
Cover
Included
Extras
Phone app (option) · music · 6 shell and 5 cabinet colors

What stands out

  • The only 115 V-capable Highlife: 3 seats, one Moto-Massage DX, 22 jets, single 1.65 HP pump.
  • Moto-Massage DX. Patented moving jet whose two streams sweep up and down the back, paired with four Precision jets for neck and shoulders.

Worth knowing

  • 2026 jet recall. CPSC recall of six-fin rotary hydromassage jets in model-year 2023–2025 Highlife spas (all eight current models) over entanglement and drowning hazards; the fix is replacement jet inserts.
2 more about the Highlife
  • Add-ons don't all combine. The optional ozone and silver-ion purifiers cannot be used with the Smart Monitoring System.
  • Warranty ends on resale. Coverage ends when ownership transfers.

Similar tubs. Same size, any brand.

The detailsAll 87 specs, the energy filing and every source

Every specification

Everything Hot Spring publishes for the Jetsetter. The dot after a value opens the document it came from.

Size & capacity

Seats
3
Loungers
1
Shape
Rectangular
Length
84"
Width
68"
Height (cabinet)
33"
Water (gallons)
245 gal
Water (liters)
925 L
Weight, empty
500 lb
Weight, filled
3,070 lb

Jets & pumps

Total jets
22
Jet systems
Moto-Massage DX, SmartJet System, Comfort Control, Jet-Cluster system
Neck & shoulder jets
4
Jet pumps
1
Pump horsepower
1.65 HP
Circulation pump
Yes

Electrical & heat

Voltage
115 V or 230 V
Amps
115 V / 20 amp or 230 V / 50 amp
120V plug-and-play
Yes
Heater (240V)
6 kW
Heater type
No-Fault

Build & insulation

Insulation
Multiple layers of urethane foam
Base pan
Insulated polymeric base pan
Shell material
Acrylic
Shell colors
Alpine White, Ice Gray, Ivory, Platinum, Pebble, Tuscan Sun
Cabinet colors
Java, Charcoal, Blackwood, Linen, Brushed Nickel
Frame
Polymeric substructure integrated with sealed base pan
Cover included
Yes
Cover thickness
4" tapered core

Water care

Filtration
100% No-Bypass Filtration with High-Flow Tri-X filters
Filters
3
Filter area
195 sq ft
Ozone
Optional (FreshWater III high-output ozone, corona discharge)
Salt system
FreshWater Salt System (included; smart monitoring and dosing optional)

Controls & features

Control system
Proprietary (Watkins)
Topside control
Color LCD touchscreen
App / Wi-Fi
Optional
Interior lighting
Customizable LED Zone Lighting
Exterior lighting
Multi-Color LED Lighting with Timer
Audio
Wireless music system: optional, subwoofer not available

Price as published

List price
17,499
List price seen
2026-09-20

Doesn’t have: water features.

In Hot Spring’s words

Seats
Moto-Massage® Lounge Seat (Moto-Massage® DX Jet, Directional Precision® Jet, JetStream® Jet); Bucket Seat (Rotary Hydromassage Jet, Directional Hydromassage Jet); Bucket Seat (HydroStream® Jet)
Jets by type
1 × Moto-Massage® DX (2), 2 × SoothingStream®, 1 × JetStream®, 1 × Rotary Hydromassage, 2 × Rotary Precision®, 14 × Directional Precision®
GFCI required
GFCI-protected power cord included for 115 V; GFCI-protected subpanel required for 230 V mode

Energy filing

Standby power
144 W, about $19.12 a month at 18.19¢ per kWh
California’s limit for its size
177 W
Typical for its size
158 W (the middle of 82 tubs this size)
Water in the test
220 gallons
Filed as
Jetsetter, June 25, 2026

Standby is what the tub draws just holding its temperature, measured to California’s test method ↗. Your bill depends on your weather, your rate and how often you soak.

Where Hot Spring’s documents disagree

Two of its own documents give different answers. Check these against your quote.

Jets by type
1 Moto-Massage® DX (2), 2 SoothingStream®, 1 JetStream®, 1 Rotary Hydromassage, 2 Rotary Precision®, 14 Directional Precision® or Seat map lists a "HydroStream® Jet" and "Directional Hydromassage Jet" for bucket seats
Cabinet colors
5 colors: Java, Charcoal, Blackwood, Linen, Brushed Nickel or "Choose from six cabinet finishes"

What’s a good deal on the Jetsetter?

We send you the price range, by call, text or email: what a great deal, a good deal and market value look like. Then we introduce you to one Hot Spring dealer near you, who reaches out knowing what you expect to pay.

Get a price on this tub

Free. Your price range, then one dealer near you.

Get a price on this tub Free price range, then one dealer