Hot Spring · Hot Spot
Hot Spring Pace hot tub
Five seats, two of them loungers. Suits a couple or a small family. It plugs into a standard 120V outlet.
- Seats: 5 seats
- Lounger: 2 loungers
- Size: 6′ 10″ × 6′ 10″
- Power: 120V plug-in or 240V
$11,499Maker's list price (MSRP)Checked Oct 2026 · hotspring.comWhat it costs
Free. Your price range, then one dealer near you.
Sit in it. 5 seats, 2 loungers.
What it costs.
Price
$11,499Maker's list price (MSRP)Checked Oct 2026 · hotspring.comExpect options, delivery, installation and tax on top of Hot Spring's MSRP; dealers set the actual price.
To keep it hot
Standby in California’s test, at the US average 18.19¢ per kWh. Heating fresh water and using the jets add to it.
What owners say.
How it’s built. The 8 build checks, in plain words.
The same eight checks we run on every brand, answered from Hot Spring’s own documents. Tap one for what it means and the evidence.
Self-supporting shellDoes the shell hold itself up?Partly
Fiberglass-reinforced shell, but Watkins says the frame carries the load.
Acrylic is thermoformed and backed with resin and fiberglass, then attached to a surrounding frame. Watkins' own patent credits that frame with absorbing the shell's loads, and the Highlife foam is said to add support. Limelight and Hot Spot use FiberCor fill, which carries no load at all.
Applies to: All models, split by collection: Highlife and Highlife NXT are full-foam; Limelight and Hot Spot are filled with FiberCor blown fiber
Clamped plumbingAre the hoses glued and clamped?Not published
Hot Spring doesn't publish this. Ask the dealer.
Watkins never describes how hose meets fitting, and owner's manuals from 1999 to 2025 say nothing about clamps. No parts diagram or verified teardown photo exists either. On full-foamed Highlife models, reaching any joint means cutting foam out first.
Applies to: All collections; not published for any of them
Manifold-fed jetsDoes each jet get its own line?Not published
Hot Spring doesn't publish this. Ask the dealer.
The SmartJet diverter confirms the tub is split into jet groups fed through a valve. What happens below that valve is undocumented. There is no way to tell whether each jet gets its own run or jets are teed together.
Applies to: All collections; not published for any of them
Standard partsCan any repair tech buy the parts?Partly
Every part is Watkins-only, but anyone can buy them.
The control box, heater, pumps, filters and jets are all Watkins designs ordered by part number, with no Balboa or Waterway equivalent. At least five independent suppliers stock them without dealer credentials. But the warranty is void if anyone other than an authorized rep does the repair.
Applies to: All models; Highlife, Limelight and Hot Spot share the same proprietary equipment
Compression-fitted jetsAre the jet bodies held by a nut, not glue?Partly
Most jet bodies clamp the shell with a threaded ring; the newest aren't documented.
A Hot Spring parts seller lists wall-fitting nuts that clamp the shell to the jet body, the gaskets, and a spanner wrench for them. Moto-Massage jets screw to the shell. The 2023-and-later 5-inch body isn't documented, and Hot Spring publishes nothing on it.
Applies to: All series
Adjustable jetsCan you turn each jet up or down?Not published
Service networkCan someone near you fix it?Yes
Sold and serviced through authorized dealers, with a factory backstop.
Hot Spring sells only through franchised showrooms, and the manual routes setup, operation and repair questions to your dealer. The warranty lists the Vista, California factory by address and phone if the dealer cannot help. Service quality still depends on which dealer is near you.
Applies to: All models, US market
American made?Built in Vista, California and Tijuana, Mexico.Partly
Built in Vista, California and Tijuana, Mexico.
Vista, California: Headquarters and manufacturing facility at 1280 Park Center Drive. Tijuana, Mexico: First plant opened 1996; Watkins does not say which models are built there.
Applies to: Hot Spring tubs sold in the US; tubs built for other markets weren't checked
The full Hot Spring build-quality report, ranked against every brand →
Also on this model
Full-foam insulationIs it foamed all the way through?FiberCor
Warranty
- Shell structure
- 5 years
- Shell surface
- 2 years
- Equipment
- 2 years
- Plumbing
- 2 years
- Cabinet
- 2 years
- Heater
- 2 years
What you get.
Hot Spot. 'The essential Hot Spring experience': acrylic shells, FiberCor insulation and a continuous circulation pump at a lower price.
What stands out
Similar tubs. Same size, any brand.
More like it:Tubs for 4 to 5Plug-and-play hot tubsHot tubs with a loungerHot tub weightHot tub electrical requirements
The detailsAll 94 specs, the energy filing and every source
Every specification
Everything Hot Spring publishes for the Pace. The dot after a value opens the document it came from.
Size & capacity
Electrical & heat
Build & insulation
Water care
Controls & features
Feature guides:InsulationCoversHeatersFiltersWi-Fi appsAudioLightingWater featuresWhich features are worth paying for
Energy filing
- California’s limit for its size
- 205 W
- Typical for its size
- 179 W (the middle of 123 tubs this size)
- Water in the test
- 291 gallons
Standby is what the tub draws just holding its temperature, measured to California’s test method ↗. Your bill depends on your weather, your rate and how often you soak.
Where Hot Spring’s documents disagree
Two of its own documents give different answers. Check these against your quote.
Ask the dealer
Hot Spring doesn’t publish the pump horsepower or frame material for the Pace. Ask for them in writing.
What’s a good deal on the Pace?
We send you the price range, by call, text or email: what a great deal, a good deal and market value look like. Then we introduce you to one Hot Spring dealer near you, who reaches out knowing what you expect to pay.
Get a price on this tub
Free. Your price range, then one dealer near you.
Get a price on this tub Free price range, then one dealer